Kegco K199 Kegerators are Full-Size Single or Multiple Tap Beer Keg Coolers that are set up to tap most D System Domestic American Beer Kegs. It comes complete with a D System Direct Draw Kit, which features a metal lever-handle keg coupler that is compatible with most beers kegged in the United States, Mexico, and Canada. The Direct Draw System also includes a 5 lb. CO2 cylinder, a premium single gauge regulator, a chrome plated metal draft beer tower, and all of the hoses and fittings necessary to dispense a cold draft beer. The lightweight 5 lb. Aluminum CO2 Tank is shipped empty and does not come filled. When full, the 5 lb. tank is good for approximately five-six full size tanks. The Single Gauge Regulator measures Pounds Per Square Inch (PSI), features a Safety Blow Off at 55-65 PSI, and comes with a flow control inlet nipple filter as well as a permanent Quad-Ring Inlet Seal.
Includes a complete commercial keg dispense system that ensures you have everything you need to tap a keg of beer - 5 lb aluminum CO2 tank, pro series CO2 regulator, commercial grade D system lever handle keg coupler, 3" diameter single faucet draft tower, hoses, clamps and fittings
The CO2 Tank is made of high strength aluminum alloy and is superior to a steel tank because it will not rust. It is stamped with required U.S. Department of Transportation and Transport Canada Markings. An average fill is good for 5-6 Full Size Kegs depending upon your fill. The pro series single gauge regulator has a chrome plated brass body with a large pressure adjustment knob for easy use, and includes both a manual pressure release valve and a safety relief valve that releases at 45-psi.
The NSF-approved commercial grade keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe and a pressure relief valve. It is designed for use with all domestic brand American D system Sankey kegs. It is easy to use - simply pull out and then down on the lever handle to tap the keg. The chrome plated 3" diameter air-cooled tower is the same tower used on most commercial grade kegerators and includes 5 feet of clear beer line with a nozzle and hex nut assembly.
This quiet and energy efficient beer cooler features a reversible door, a removable plastic drip tray, a chrome guard rail, a stainless steel interior floor mat, easy-roll locking casters for mobility, a knockout for external CO2 tank mount and includes two removable shelves that allow it to be converted to a mini fridge. It has the capacity to hold one Full Size (15.5 Gallon) or Quarter Barrel (7.75 Gallon) Keg and up to two Five Gallon Kegs, both home brew and domestic.
Dimensions: 33"H x 20"W x 25.5"D - NOTE: DOES NOT HOLD RUBBER OR BEVEL KEGS THAT ARE WIDER IN THE MIDDLE